Many of us ignore one of the components of this motorbike because it is considered not too often used even not bothering at all when your motorbike is used even though this horn does not exist. Though this one component is one of 10 motorcycle spare parts that are often damaged and you should pay more attention. However, this view is wrong, but you need to realize that the important role of your motorcycle horn will be very important, especially at night to ignore your presence in other vehicles. Therefore, having the best motorcycle horn is very necessary.
Among the causes of Weak Motor Horn Sounds are
1. Your horn regulator bolt is loose
The cause of the loose metal horn plate bolts due to vibration on the engine motor continuously. If this happens, then the sound of the horn will die or weak this is because between the two metals contained in the horn can not produce the right frequency.
2. Both Damaged or Dirty Metal Contractors
Things like this usually occur in horns that are old or old. Usually, this component is damaged or very dirty due to time and age. The contractor itself is a place of electrical current (DC).
3. Induction of Weak Horn or Weak Wires
This case usually occurs because the wire coating of the wire has been peeled off. Due to this flaking of the wire strips, induction on your horn wire is also accompanied by a weak coil. If this happens to your horn, you can be sure that when you press the horn of your motorcycle the sound will be weak or even die altogether.
4. Check the condition of your motorcycle battery
You should do regular checks on your motorcycle battery. Because if your motorcycle battery is used up or worn out, then your horn will automatically also not be able to function. In addition to the horn, starter and the lights of your motorcycle will certainly not be used. how to care for a motorcycle battery by paying attention to checking you should do it regularly.
5. Check the Cabling
Usually, the horn cable is separated from the switch. Besides, the possible cause is that the platinum bolt behind the horn does not fit. To overcome this, you simply remove the locking bolt and place it in the correct position according to the standard.
Then do the test by pressing the horn whether it has made a sound like it should or not. If it hasn’t, then check the other cables until your horn has sounded the way it should.
6. The horn switch is rusted
Usually, the switch if there is rust or crust then when pressed it will not produce the normal sound, because it is blocked by rust or crust lodged in the switch. To clean it, pay attention to how to remove rust on the motor. All you have to do is remove the horn switch, then clean the dirt and rust found on the switch by using special rust cleaning liquid. If you feel clean, dry it with cotton or chamois, then put it back into its original position.
7. If your horn is dead
On the horn-like this there are components that you must replace. Usually, the windings on your horn have broken, but the magnet on the horn has also been damaged. If you do not want to replace with a new horn, you should replace the damaged part before then put it back following the original standard, so that your horn can function again. The horn that is not following the standard can be the cause of the motor battery to drop quickly and it will trigger the horn to often not work.
It can be concluded that the explanation and review above regarding the causes of weak motor horn sounds, may be able to be used as reference material to maintain the condition of the motor chain.